Acoustic Ceiling Tile Cost – An acoustic ceiling, also commonly referred to as a drop ceiling, is a ceiling system that is very beneficial for times when homeowners require access to utilities which are located high above. Be it brick, Sheetrock, concrete, acoustic ceiling systems are capable of being mounted onto almost any kind of walls.
Though acoustic ceilings are most popularly used in commercial buildings, they are also capable of being used in various rooms and basements in houses. While maintaining their finished look and appearance, they are also helpful in allowing access to electrical conduits, plumbing pipes, and ductwork.
Materials, Form, and Design
Acoustic ceiling tiles are formed out of a variety of sound absorbing and fibrous materials like foam, wood, or cork. They are available in a wide range of modernized colors, designs, and styles. Acoustic ceiling tiles that are on the modern side can imitate loads of different materials such as textures paint, stucco, or fabric. They can give off an appeal of a seamless as well as a creative beveled looking design.
Styling Options of Acoustic Ceiling tile
Acoustic ceilings are available in two styles which are described below.
- Glued Ceilings – Glued ceilings are normally 1×1 foot tiles which are directly glued onto the ceiling. These tiles are usually available in sizes of 12 x 12 inches.
- Suspended or Dropped Ceilings – This is the more common type of acoustic ceiling and includes 2 x 2 foot and 2 x 4 foot tiles which are dropped into a grid of interlocking metal. They are then suspended from the ceiling. The larger panels use up less materials, are installed faster, and are therefore less expensive.Both of the styles provide soundproofing features and are useful in covering up any existing damage. However, only suspended ceiling panels are capable of hiding the exposure of pipes, wires and ducts.
Benefits of Using Acoustic Ceiling Tiles
Acoustical ceiling tiles are associated with a number of benefits and advantages and some of them are mentioned below:
- They are equipped with sound absorbing properties which can take away the harsh qualities associated with ceilings.
- They improve and enhance the sound quality in rooms and are also helpful in the reduction of echo.
- These tiles are also an aid in the reduction of noise that floods in from one story to another in houses.
- These acoustic tile ceilings can be easily cleaned in cases when they are affected by smoke, soil or dust.
- They are also impact resistant and are capable of being easily replaced in case any damage is done to them.
- Acoustic ceiling tiles are a handy source of concealing unsightly necessities such as wires and pipes.
- These tiles provide for ease of accessibility in times of remodeling or repairs are needed.
- Acoustic ceiling tiles are extremely light reflective and therefore, they allow light to reflect back into rooms in which they are installed.
Acoustic Ceiling Tile Cost
No matter what amount is spent on acoustic ceiling tiles, labor charges must remain constant. In case these tiles are installed in many small sized rooms instead of two to three larger rooms, costs can increase if charges are on a per square foot basis. The reason for these extra charges is that it is time consuming to set up the tools and equipment. Acoustic ceiling tiles can be purchased in sizes of 2’ x 2’ and also in 2’ x 4’.
[table “” not found /]
When conferring with ceiling contractors, the ceiling’s height should be discussed in order to ensure that nothing needs to be moved to reach the desired height. If fixtures or the building around an acoustic ceiling needs to be moved during the installation process, then moving costs can add up to $1,000 or more.
This article is a guide on acoustic ceiling tile costs and all prices are based on average estimates. It is best to seek the help of professional contractors when installing acoustic ceiling tiles as they will be equipped with the skill and knowledge required in completing the job in the correct and proper manner.
Actual costs may vary depending upon factors such as location, size of the room, the contracting company, and the time required to complete the task.